---
title: "Portals II · Harness Architecture"
description: "A door is a leaf, two jambs and the wall it sits in. Standard leaf widths, jamb sizes and stud walls combine into every possible portal size."
source: https://www.testfit.io/harness-architecture/portal-ii
last_updated: 2024-09-03T00:00:00Z
---

Essay · September 3, 2024

# Portals II

- **Author**: Clifton Harness
- **Date**: September 3, 2024
- **Address**: /harness-architecture/portal-ii

Interactive study One portal · three frame-in wall assemblies

A boring post about…Doors And their Parameters.

## **Door Things**

- The door you are thinking of it is actually called a **leaf**
- **Possible Widths**: 18, 20, 22, 24, 28, 30, 32, 34, 36, 42, 48 inches

- **Possible Thicknesses**: 1.375, 1.75, 2, 2.25

The underlying data basically supports that the default door **leaf** is 36″ wide and 1 3/4″ Thick. In the spirit of only plans, we will ignore height for now.

![Door-leaf width and thickness heatmap, with the highest plotted frequency at 36 inches wide and 1¾ inches thick.](https://www.testfit.io/studies/images/2024/08/heatmap-1024x657.webp)

_Image description: The horizontal axis lists widths of 18, 20, 22, 24, 28, 30, 32, 34, 36, 42 and 48 inches. Rows show thicknesses of 1⅜, 1¾, 2 and 2¼ inches. The darkest cell is 36 by 1¾ inches, labeled 28; this is the comparison used in the preceding paragraph, not a documented market survey._

- **Door Clearance** **Arc Radius**: = Possible Widths
- **Open Door** **Additional Clearance:** 3″
- **Jamb Width** – I will make a separate post about walls, which drives jamb width. Jk its below.
- **Jamb Thickness**:0.75, 0.875, 1, 1.25
- Lost my energy here.. now wanting to make a wall configurator, as the wall thickness drives exactly how wide the jamb needs to be

![Bar chart comparing the wood and steel stud depths used in the illustration.](https://www.testfit.io/studies/images/2024/08/image-36-1024x704.webp)

_Image description: The wood bars show 3½, 5½, 7¼, 9¼ and 11¼ inches. The steel bars show 1¼, 2½, 3⅝, 4 and 6 inches. These are the values plotted in the historical chart._

Alright back to the basics of architecture. A wall is basically gyp+stud+gyp. This means that the Jamb needs to be larger than the stud its anchored to.

![Paired bars compare stud depth with a jamb one inch larger in each example.](https://www.testfit.io/studies/images/2024/08/image-37-1024x723.webp)

_Image description: Blue bars show the stud sizes; orange bars add one inch to each. The five wood examples are 3½→4½, 5½→6½, 7¼→8¼, 9¼→10¼ and 11¼→12¼ inches. The five steel examples are 1¼→2¼, 2½→3½, 3⅝→4⅝, 4→5 and 6→7 inches. These are the drawing’s values, not a universal jamb specification._

I wonder if I can get GPT to visualize this with gyp…

![Stud-and-gypsum diagram compares the combined wall thickness with the adjacent jamb.](https://www.testfit.io/studies/images/2024/08/image-38-1024x725.webp)

_Image description: Each example adds a half-inch gray gypsum layer at both ends of the blue stud depth. The orange jamb bar matches that illustrated total. The paragraph after the image adds the author’s further 1/16-inch allowance._

Nuts. Okay so here we have our possible dimensions for Jamb widths, with an explanation of why. Except Jambs are always like 1/16″ larger than what is shown here.

Door Assembly Width = Jamb Thickness (0.75, 0.875, 1, 1.25) + Leaf Width (18, 20, 22, 24, 28, 30, 32, 34, 36, 42, 48) + Jamb Thickness (0.75, 0.875, 1, 1.25). Nice. The cross product of these two give us our possible portal widths. The Jamb data gives us the depths. Walls and Doors are basically the same thing. To build doors, you need walls. Those walls, though, will only have standard widths that look like this:

![Ascending bars show door assembly widths formed by adding two jamb thicknesses to a door-leaf width.](https://www.testfit.io/studies/images/2024/08/image-39-1024x611.webp)

_Image description: The chart groups the leaf widths listed earlier with two jambs of ¾, ⅞, 1 or 1¼ inches each. The resulting illustrated widths run from 19½ to 50½ inches. The horizontal positions enumerate combinations; they are not another physical dimension._

End of essay · Clifton Harness · September 3, 2024
