---
title: "Point Block Apartments Site Plan"
description: "3-story buildings of 12 2BR flats around one stair. Test this layout on your parcel and see units, parking and density in TestFit."
source: https://www.testfit.io/typologies/presets/point-block-street
last_updated: 2026-11-18T18:40:42Z
---

Point Block Apartments

# Test Point Block Apartments on Your Site

Three-story buildings of twelve 2BR flats around a single stair, facing the street. For builders testing single-stair walk-ups, see how many units fit.

- [Test Your Site](https://www.testfit.io/sales.md)
- [All Missing Middle Layouts](https://www.testfit.io/typologies/low-density.md)

## Will Point Block Apartments Work on My Site?

TestFit is real estate feasibility software that generates site plans on your parcel and calculates what they yield. For a bungalow court, point block or sixplex community, the answer comes down to three things that are hard to judge from a parcel map.

- ### One stair caps the building
  Small single-stair buildings keep costs down but cap units per building, so building count drives yield.
- ### Parking ratios set the ceiling
  At sixplex and point block density, parking requirements decide how many buildings the site can carry.
- ### Shared space is the product
  Courts and courtyards sell the units, but they compete with buildings and parking for the same acres.

## From Your Parcel to a Deal You Can Underwrite

Start from the layout your team would build, tune it to your standards, and finish with one model for the site, plan, tabulation and pro forma.

- ![TestFit site inputs: parcel boundary with setbacks, flood zone and wetland easements, and elevation contours](https://www.testfit.io/images/presets/low-density/step-1-inputs.webp)
  1\. Inputs
  ### Your parcel and its constraints
  - **Site boundary:** built-in parcels with owner info, drawn, metes and bounds, or KML/KMZ
  - **Setbacks:** front, side and rear, set to the parcel edges
  - **Zoning:** FAR, coverage, height and parking ratios, pulled in for your parcel
  - **Site conditions:** easements, flood zones, wetlands and topography from Site Intelligence
  Every layout starts inside your site's real constraints.
- ![Point Block Apartments, 3D layout generated in TestFit](https://www.testfit.io/images/presets/point-block-street/iso.webp)
  2\. Generated layout
  ### Your product, fine-tuned on the site
  - **Product:** 3-story buildings of 12 2BR flats around one stair
  - **Building:** Twelve 2BR flats, four per floor over three stories, around a single stair
  - **Site layout:** buildings face residential streets
  - **Your edits:** building types, unit mix, streets and parking
  You see the community your team would propose, on your parcel.
- ![Point Block Apartments, 2D site plan generated in TestFit](https://www.testfit.io/images/presets/point-block-street/plan.webp)
  3\. Outputs
  ### A source of truth for the deal
  - **Site plan:** buildings, streets, alleys and parking on the parcel
  - **Tabulations:** units by type, parking stalls against requirements, density and coverage
  - **Financials:** a live pro forma of development costs, revenue and returns, with per-formula editing as needed
  - **Sharing:** a link or PDF report for your team and partners
  You know whether the deal works, with numbers to back it.

> TestFit automates the manual process of testing development feasibility and saves us many hours of manual work. This allows us to run more scenarios and alternatives for every project. It also creates better, more accurate basic massing visuals than we can do manually.

_Jamin Kimmell Partner ![Cascadia Partners](https://www.testfit.io/_astro/64dea62a14b953e7da295bf6_Cascadia-Partners-Logo_WKPyi.webp)_

## Point Block Apartments Site Planning FAQ

### When do point block apartments make sense?

On small sites, and where codes allow single-stair buildings at this height, for builders testing walk-up apartments without a corridor building.

### What is a point block?

A compact apartment building with every flat around a single stair instead of a double-loaded corridor. Single-stair buildings fit small sites and give each flat more exterior wall.

### What is in each building?

Twelve 2BR flats, four per floor over three stories, around a single stair.

### How is the site laid out?

Buildings face residential streets. TestFit lays this pattern out inside your parcel and setbacks, and you can edit the streets and buildings from there.

### Can I change the layout after it generates?

Yes. Start from this layout, then edit the building types, unit mix, streets and parking in TestFit. The site plan and yield recalculate as you go.

### Find it in TestFit

- **Preset name**: Point Block - Street
- **In-app description**: 3-story buildings of 12 2BR flats around one stair

## Test This Layout on Your Next Missing Middle Site

Load your parcel and get the site plan, yield, and costs in one place.

[Talk to Sales](https://www.testfit.io/sales.md)
