---
title: "Courtyard Stacked Townhomes Site Plan"
description: "4-story stacks of 2BR flats, one per floor, facing a courtyard. Test this layout on your parcel and see units, parking and density in TestFit."
source: https://www.testfit.io/typologies/presets/stacked-townhomes-courtyard
last_updated: 2026-11-18T18:40:42Z
---

Stacked Townhomes, Courtyard

# Test Courtyard Stacked Townhomes on Your Site

Stacked 2BR flats facing court walks, with a parking loop at the edge and a gap behind every row so each flat keeps light front and back. See how a courtyard stack plan compares with the street version.

- [Test Your Site](https://www.testfit.io/sales.md)
- [All Townhome Layouts](https://www.testfit.io/typologies/low-density.md)

## Will Courtyard Stacked Townhomes Work on My Site?

TestFit is real estate feasibility software that generates site plans on your parcel and calculates what they yield. For a walk-up townhome community, the answer comes down to three things that are hard to judge from a parcel map.

- ### Parking has to go somewhere
  With no garages, every car parks on the street, in shared bays or off an alley. Where that parking goes decides how many rows the blocks can hold.
- ### Frontage sets the count
  Every stoop home needs a front door on a street, court or green. The fronting edge you can create limits how many homes fit.
- ### Blocks trade land for character
  Short blocks add street parking and walkability, but every added street takes land that could hold homes.

## From Your Parcel to a Deal You Can Underwrite

Start from the layout your team would build, tune it to your standards, and finish with one model for the site, plan, tabulation and pro forma.

- ![TestFit site inputs: parcel boundary with setbacks, flood zone and wetland easements, and elevation contours](https://www.testfit.io/images/presets/low-density/step-1-inputs.webp)
  1\. Inputs
  ### Your parcel and its constraints
  - **Site boundary:** built-in parcels with owner info, drawn, metes and bounds, or KML/KMZ
  - **Setbacks:** front, side and rear, set to the parcel edges
  - **Zoning:** FAR, coverage, height and parking ratios, pulled in for your parcel
  - **Site conditions:** easements, flood zones, wetlands and topography from Site Intelligence
  Every layout starts inside your site's real constraints.
- ![Stacked Townhomes, Courtyard, 3D layout generated in TestFit](https://www.testfit.io/images/presets/stacked-townhomes-courtyard/iso.webp)
  2\. Generated layout
  ### Your product, fine-tuned on the site
  - **Product:** 4-story stacks of 2BR flats, one per floor, facing a courtyard
  - **Home size:** 22 ft wide by 44 ft deep
  - **Site layout:** rows face court walks, with a parking loop at the edge and a gap behind every row so each flat keeps front and back exposure
  - **Your edits:** home types, rows, streets, alleys and parking
  You see the community your team would propose, on your parcel.
- ![Stacked Townhomes, Courtyard, 2D site plan generated in TestFit](https://www.testfit.io/images/presets/stacked-townhomes-courtyard/plan.webp)
  3\. Outputs
  ### A source of truth for the deal
  - **Site plan:** buildings, streets, alleys and parking on the parcel
  - **Tabulations:** units by type, parking stalls against requirements, density and coverage
  - **Financials:** a live pro forma of development costs, revenue and returns, with per-formula editing as needed
  - **Sharing:** a link or PDF report for your team and partners
  You know whether the deal works, with numbers to back it.

> TestFit automates the manual process of testing development feasibility and saves us many hours of manual work. This allows us to run more scenarios and alternatives for every project. It also creates better, more accurate basic massing visuals than we can do manually.

_Jamin Kimmell Partner ![Cascadia Partners](https://www.testfit.io/_astro/64dea62a14b953e7da295bf6_Cascadia-Partners-Logo_WKPyi.webp)_

## Stacked Townhomes, Courtyard Site Planning FAQ

### When do stacked townhomes make sense?

When a townhome site needs more units than a row can deliver but a corridor apartment building is too much: the step between townhomes and missing middle.

### What is a stacked townhome?

A building of stacked flats, one home per floor, arranged in rows like townhomes. Each flat gets front and back exposure, and the row reads like townhomes from the street.

### How big are the homes in this layout?

4-story stacks of 2BR flats, one per floor, facing a courtyard. Each home is 22 ft wide by 44 ft deep.

### How is the site laid out?

Rows face court walks, with a parking loop at the edge and a gap behind every row so each flat keeps front and back exposure. TestFit lays this pattern out inside your parcel and setbacks, and you can edit the streets and buildings from there.

### Can I change the layout after it generates?

Yes. Start from this layout, then edit the home types, rows, streets, alleys and parking in TestFit. The site plan and yield recalculate as you go.

### Find it in TestFit

- **Preset name**: Stacked Townhomes - Courtyard
- **In-app description**: 4-story stacks of 2BR flats, one per floor, facing a courtyard

## Test This Layout on Your Next Townhome Site

Load your parcel and get the site plan, yield, and costs in one place.

[Talk to Sales](https://www.testfit.io/sales.md)
