Skip to content

Charleston Single Houses

Test Charleston Single Houses on Your Site

Two-story, 3BR single houses with side piazzas, facing a courtyard. For Lowcountry infill, see how many fit on your site.

Will Charleston Single Houses Work on My Site?

TestFit is real estate feasibility software that generates site plans on your parcel and calculates what they yield. For an urban infill single-family plan, the answer comes down to three things that are hard to judge from a parcel map.

  • Narrow lots, tight blocks

    Urban house types depend on lot width and block length. A few feet per home changes the count.

  • Parking on the street or alley

    Most of these homes have no garage, so parking has to fit on the street or off an alley.

  • Character is the point

    These house types sell on how they meet the street, so porches, piazzas and setbacks are part of the plan.

From Your Parcel to a Deal You Can Underwrite

Start from the layout your team would build, tune it to your standards, and finish with one model for the site, plan, tabulation and pro forma.

  • TestFit site inputs: parcel boundary with setbacks, flood zone and wetland easements, and elevation contours

    1. Inputs

    Your parcel and its constraints

    • Site boundary: built-in parcels with owner info, drawn, metes and bounds, or KML/KMZ
    • Setbacks: front, side and rear, set to the parcel edges
    • Zoning: FAR, coverage, height and parking ratios, pulled in for your parcel
    • Site conditions: easements, flood zones, wetlands and topography from Site Intelligence

    Every layout starts inside your site's real constraints.

  • Charleston Single Houses, 3D layout generated in TestFit

    2. Generated layout

    Your product, fine-tuned on the site

    • Product: 2-story, 3BR houses with side piazzas, facing a courtyard
    • Home size: 18 ft wide by 44 ft deep
    • Site layout: homes face shared courtyard walks, gable end to the walk, with the piazza along the side
    • Your edits: home types, streets, alleys and parking

    You see the community your team would propose, on your parcel.

  • Charleston Single Houses, 2D site plan generated in TestFit

    3. Outputs

    A source of truth for the deal

    • Site plan: buildings, streets, alleys and parking on the parcel
    • Tabulations: units by type, parking stalls against requirements, density and coverage
    • Financials: a live pro forma of development costs, revenue and returns, with per-formula editing as needed
    • Sharing: a link or PDF report for your team and partners

    You know whether the deal works, with numbers to back it.

TestFit automates the manual process of testing development feasibility and saves us many hours of manual work. This allows us to run more scenarios and alternatives for every project. It also creates better, more accurate basic massing visuals than we can do manually.

Jamin Kimmell Partner

Charleston Single Houses Site Planning FAQ

When do Charleston single houses make sense?

On narrow infill lots in Lowcountry neighborhoods, or where a regional, porch-forward house type helps entitlements and sales.

What is a Charleston single house?

A narrow two-story house set gable end to the street, with a long side porch, called a piazza, running along one side.

How big are the homes in this layout?

2-story, 3BR houses with side piazzas, facing a courtyard. Each home is 18 ft wide by 44 ft deep.

How is the site laid out?

Homes face shared courtyard walks, gable end to the walk, with the piazza along the side. TestFit lays this pattern out inside your parcel and setbacks, and you can edit the streets and buildings from there.

Can I change the layout after it generates?

Yes. Start from this layout, then edit the home types, streets, alleys and parking in TestFit. The site plan and yield recalculate as you go.

Find it in TestFit

Preset name
Charleston Single House (Piazza) - Courtyard
In-app description
2-story, 3BR houses with side piazzas, facing a courtyard

Test This Layout on Your Next Single-Family Site

Load your parcel and get the site plan, yield, and costs in one place.