Skip to content

Elevated Coastal Homes

Test Elevated Coastal Homes on Your Site

Three-story, 3BR coastal homes raised over 2-car garages. For builders in beach markets, see how many homes fit.

Will Elevated Coastal Homes Work on My Site?

TestFit is real estate feasibility software that generates site plans on your parcel and calculates what they yield. For a production single-family community, the answer comes down to three things that are hard to judge from a parcel map.

  • Home width sets the count

    Garage width, side yards and home width decide how many homes line each street.

  • Streets take a big share

    Every home needs frontage, so street length grows with the home count.

  • Product mix changes yield

    Ranches, two-story homes and narrow starters lay out differently on the same site.

From Your Parcel to a Deal You Can Underwrite

Start from the layout your team would build, tune it to your standards, and finish with one model for the site, plan, tabulation and pro forma.

  • TestFit site inputs: parcel boundary with setbacks, flood zone and wetland easements, and elevation contours

    1. Inputs

    Your parcel and its constraints

    • Site boundary: built-in parcels with owner info, drawn, metes and bounds, or KML/KMZ
    • Setbacks: front, side and rear, set to the parcel edges
    • Zoning: FAR, coverage, height and parking ratios, pulled in for your parcel
    • Site conditions: easements, flood zones, wetlands and topography from Site Intelligence

    Every layout starts inside your site's real constraints.

  • Elevated Coastal Homes, 3D layout generated in TestFit

    2. Generated layout

    Your product, fine-tuned on the site

    • Product: 3-story, 3BR coastal homes raised over 2-car garages
    • Home size: 32 ft wide by 44 ft deep
    • Site layout: homes face residential streets, with two-car garages at ground level under the living floors
    • Your edits: home types, streets, alleys and parking

    You see the community your team would propose, on your parcel.

  • Elevated Coastal Homes, 2D site plan generated in TestFit

    3. Outputs

    A source of truth for the deal

    • Site plan: buildings, streets, alleys and parking on the parcel
    • Tabulations: units by type, parking stalls against requirements, density and coverage
    • Financials: a live pro forma of development costs, revenue and returns, with per-formula editing as needed
    • Sharing: a link or PDF report for your team and partners

    You know whether the deal works, with numbers to back it.

TestFit automates the manual process of testing development feasibility and saves us many hours of manual work. This allows us to run more scenarios and alternatives for every project. It also creates better, more accurate basic massing visuals than we can do manually.

Jamin Kimmell Partner

Elevated Coastal Homes Site Planning FAQ

When do elevated coastal homes make sense?

In coastal and beach markets where raised living space and porches are expected.

What is an elevated coastal home?

A detached home with its living floors raised over a ground-level garage, so the main floors sit above the street, with porches front and back.

How big are the homes in this layout?

3-story, 3BR coastal homes raised over 2-car garages. Each home is 32 ft wide by 44 ft deep.

How is the site laid out?

Homes face residential streets, with two-car garages at ground level under the living floors. TestFit lays this pattern out inside your parcel and setbacks, and you can edit the streets and buildings from there.

Can I change the layout after it generates?

Yes. Start from this layout, then edit the home types, streets, alleys and parking in TestFit. The site plan and yield recalculate as you go.

Find it in TestFit

Preset name
Elevated Coastal - Street
In-app description
3-story, 3BR coastal homes raised over 2-car garages

Test This Layout on Your Next Single-Family Site

Load your parcel and get the site plan, yield, and costs in one place.