Skip to content

Production Homes, Street-Facing

Test Street-Facing Production Homes on Your Site

Two-story, 4BR homes with 2-car garages and front porches. For production builders, see how many homes your site yields before engineering.

Will Street-Facing Production Homes Work on My Site?

TestFit is real estate feasibility software that generates site plans on your parcel and calculates what they yield. For a production single-family community, the answer comes down to three things that are hard to judge from a parcel map.

  • Home width sets the count

    Garage width, side yards and home width decide how many homes line each street.

  • Streets take a big share

    Every home needs frontage, so street length grows with the home count.

  • Product mix changes yield

    Ranches, two-story homes and narrow starters lay out differently on the same site.

From Your Parcel to a Deal You Can Underwrite

Start from the layout your team would build, tune it to your standards, and finish with one model for the site, plan, tabulation and pro forma.

  • TestFit site inputs: parcel boundary with setbacks, flood zone and wetland easements, and elevation contours

    1. Inputs

    Your parcel and its constraints

    • Site boundary: built-in parcels with owner info, drawn, metes and bounds, or KML/KMZ
    • Setbacks: front, side and rear, set to the parcel edges
    • Zoning: FAR, coverage, height and parking ratios, pulled in for your parcel
    • Site conditions: easements, flood zones, wetlands and topography from Site Intelligence

    Every layout starts inside your site's real constraints.

  • Production Homes, Street-Facing, 3D layout generated in TestFit

    2. Generated layout

    Your product, fine-tuned on the site

    • Product: 2-story, 4BR homes with 2-car garages and front porches
    • Home size: 40 ft wide by 50 ft deep
    • Site layout: homes face residential streets with two-car front garages
    • Your edits: home types, streets, alleys and parking

    You see the community your team would propose, on your parcel.

  • Production Homes, Street-Facing, 2D site plan generated in TestFit

    3. Outputs

    A source of truth for the deal

    • Site plan: buildings, streets, alleys and parking on the parcel
    • Tabulations: units by type, parking stalls against requirements, density and coverage
    • Financials: a live pro forma of development costs, revenue and returns, with per-formula editing as needed
    • Sharing: a link or PDF report for your team and partners

    You know whether the deal works, with numbers to back it.

TestFit automates the manual process of testing development feasibility and saves us many hours of manual work. This allows us to run more scenarios and alternatives for every project. It also creates better, more accurate basic massing visuals than we can do manually.

Jamin Kimmell Partner

Production Homes, Street-Facing Site Planning FAQ

When do production homes make sense?

For production and build-to-rent builders laying out a suburban community where a standard two-story, two-car home is the plan.

What is a production home?

A detached home built from a builder's standard plan and repeated across a community, typically two stories with a two-car garage. It is the backbone of suburban for-sale communities.

How big are the homes in this layout?

2-story, 4BR homes with 2-car garages and front porches. Each home is 40 ft wide by 50 ft deep.

How is the site laid out?

Homes face residential streets with two-car front garages. TestFit lays this pattern out inside your parcel and setbacks, and you can edit the streets and buildings from there.

Can I change the layout after it generates?

Yes. Start from this layout, then edit the home types, streets, alleys and parking in TestFit. The site plan and yield recalculate as you go.

Find it in TestFit

Preset name
Production Home - Street
In-app description
2-story, 4BR homes with 2-car garages and front porches

Test This Layout on Your Next Single-Family Site

Load your parcel and get the site plan, yield, and costs in one place.