Skip to content

Vancouver Specials

Test Vancouver Specials on Your Site

Two-story, 4BR houses with full-width upper balconies on urban blocks. For West Coast infill, see the count on your site.

Will Vancouver Specials Work on My Site?

TestFit is real estate feasibility software that generates site plans on your parcel and calculates what they yield. For an urban infill single-family plan, the answer comes down to three things that are hard to judge from a parcel map.

  • Narrow lots, tight blocks

    Urban house types depend on lot width and block length. A few feet per home changes the count.

  • Parking on the street or alley

    Most of these homes have no garage, so parking has to fit on the street or off an alley.

  • Character is the point

    These house types sell on how they meet the street, so porches, piazzas and setbacks are part of the plan.

From Your Parcel to a Deal You Can Underwrite

Start from the layout your team would build, tune it to your standards, and finish with one model for the site, plan, tabulation and pro forma.

  • TestFit site inputs: parcel boundary with setbacks, flood zone and wetland easements, and elevation contours

    1. Inputs

    Your parcel and its constraints

    • Site boundary: built-in parcels with owner info, drawn, metes and bounds, or KML/KMZ
    • Setbacks: front, side and rear, set to the parcel edges
    • Zoning: FAR, coverage, height and parking ratios, pulled in for your parcel
    • Site conditions: easements, flood zones, wetlands and topography from Site Intelligence

    Every layout starts inside your site's real constraints.

  • Vancouver Specials, 3D layout generated in TestFit

    2. Generated layout

    Your product, fine-tuned on the site

    • Product: 2-story, 4BR houses with full-width upper balconies
    • Home size: 28 ft wide by 64 ft deep
    • Site layout: homes sit on short urban blocks
    • Your edits: home types, streets, alleys and parking

    You see the community your team would propose, on your parcel.

  • Vancouver Specials, 2D site plan generated in TestFit

    3. Outputs

    A source of truth for the deal

    • Site plan: buildings, streets, alleys and parking on the parcel
    • Tabulations: units by type, parking stalls against requirements, density and coverage
    • Financials: a live pro forma of development costs, revenue and returns, with per-formula editing as needed
    • Sharing: a link or PDF report for your team and partners

    You know whether the deal works, with numbers to back it.

TestFit automates the manual process of testing development feasibility and saves us many hours of manual work. This allows us to run more scenarios and alternatives for every project. It also creates better, more accurate basic massing visuals than we can do manually.

Jamin Kimmell Partner

Vancouver Specials Site Planning FAQ

When do Vancouver Specials make sense?

On West Coast infill lots where floor area per lot matters and a simple, efficient two-story form fits.

What is a Vancouver Special?

A boxy two-story house with a full-width upper balcony over the ground-floor entry, designed to get the most floor area from a standard city lot.

How big are the homes in this layout?

2-story, 4BR houses with full-width upper balconies. Each home is 28 ft wide by 64 ft deep.

How is the site laid out?

Homes sit on short urban blocks. TestFit lays this pattern out inside your parcel and setbacks, and you can edit the streets and buildings from there.

Can I change the layout after it generates?

Yes. Start from this layout, then edit the home types, streets, alleys and parking in TestFit. The site plan and yield recalculate as you go.

Find it in TestFit

Preset name
Vancouver Special - Urban
In-app description
2-story, 4BR houses with full-width upper balconies

Test This Layout on Your Next Single-Family Site

Load your parcel and get the site plan, yield, and costs in one place.